Browsed by
Tag: paint

5 Effective Ways to Deal with Exfoliated Paint and Other Problems

5 Effective Ways to Deal with Exfoliated Paint and Other Problems

Painting the house is the easiest way to decorate the house to make it look attractive. However, how to overcome it if the paint is peeled off? Is there an effective way? The worries of homeowners in dealing with chipped paint can be fully understood. Although it is the easiest and cheapest way to decorate a house, the house paint is also inseparable from its shortcomings. These deficiencies can be caused by human error or non-human technical factors.

If you are worried and confused about how to deal with peeling paint, then you should hire the MALERKANONEN who is an experienced painter. You should also read this review to the end. Below, we will explain ways to deal with peeling paint effectively.

Blisters or Bubbles

Blister or bulging house paint does not damage, but still makes it unsightly! Usually, the problem of blister or bubbling paint is caused by heat or humidity which removes adhesion between the paint layer and the surface of the wall. The peeling paint due to blisters or bubbles can only be overcome by removing the part and repainting. Try to shed the bubbles, smooth them with a smooth sandpaper surface, then coat with a coat of paint, then with the main paint.

Cracked or Chipped Paint

A common problem that often occurs is that people ignore cracks that arise in the walls of the house because of their small size. In fact, these cracks should not be allowed because they not only can make the paint peel but also damage the walls. Some causes of paint peeling and cracking for example because the surface settings are less than perfect or use oil-based paint as a base. To overcome this, you can first clean the peeling paint skin with a wire brush, sandpaper, then repaint.

The Paint is Too Thin

In addition to the matter of color selection, the matter of painting techniques is equally important to consider. One of the most common mistakes when not paying attention to painting techniques is the use of paint that is too thin. That’s why you need to make sure the brush is completely coated with liquid paint and follow the proper painting guidelines.

Common Mistakes When Patching Paint

Once in a while, you might want to resurface the paint in certain parts of your house, right? Unfortunately, this is also one of the problems that often “damage” the appearance of the wall after the problem of peeling paint.

The reason, many often do not pay attention to the color match between the initial paint with the color in the parts that are repainted. As a result, the color between the initial paint and repainting does not seem appropriate, whether it looks younger or older.

There are tricks that can be used to overcome this problem. One solution is to try to clean the surface of the wall to be repainted with a sponge or liquid detergent. However, it would be better if you could use the remnants of … Read More..

7 Ways to Overcome Humid Walls Before being Paint

7 Ways to Overcome Humid Walls Before being Paint

Upset because many areas of the wall in the house damp? Maybe it’s because you don’t know the right way to overcome the damp wall before painting the house. When you are building or renovating a house, the wall is one aspect of the building that deserves attention. Before finishing the wall surface, first, check the humidity conditions.

Why is that? Because the damp wall has the potential to become a moss’s nest and cause leaks in the future. In addition to these two potentials, a damp wall can make the paint not stick perfectly and last a long time. If this has happened, of course, you have to renovate the wall and spend extra funds, right? If you are looking for a good and experienced painter, the MALERKANONEN is the right choice.

Here we present to you some appropriate ways to recognize walls that are still damp.

Invisible

How to overcome the first moist wall is still very easy. When the walls have been plastered and drawn, don’t paint the walls immediately. Make sure first that the wall is completely dry. The first and most practical way to recognize walls that are still damp is with the naked eye. In plain view, a wall that has dried will look younger while a damp wall looks older because it contains water that has not yet evaporated.

Estimate the Dry Time

Checking the damp wall conditions can also be done by estimating the dry time of the cement material used. Conventional cement usually takes about three weeks to dry. Meanwhile, the more modern cement or instant cement takes about one week in the drying process. If the weather is rainy and the temperature is low, surely the drying process of the wall will take even longer.

Aluminum Foil

The next way to overcome the moist walls is to use aluminum foil sheets. You can find this type of food wrapping anywhere and at low prices. The trick spread the aluminum foil sheet and cut with a size of 20 cm x 20 cm. Glue the pieces to the wall surface using duct tape, then let stand for 24 hours. After one day, release the glue and check. If there is water droplets or dew on the aluminum foil, then the wall is certainly not completely dry. Do this again a few days later for further checking.

Protimeter

Using a special digital instrument to measure humidity (Protimeter/moisture meter) can also be an option for you. This tool has two iron plates stuck to the wall. If the Protimeter indicator lights up, it means the wall is dry and paint-worthy. Turning on the green indicator lights indicate that the humidity level of the wall is 20{44116041637a4f792457f97792eb63a54738083b306972ca6156aa7bde0ffcef}. If it is lit with yellow or red, then the wall humidity is above 20{44116041637a4f792457f97792eb63a54738083b306972ca6156aa7bde0ffcef}. At that time, you should never start finishing touches on the walls of your home. In addition to measuring humidity on walls, this tool can also be used to measure water content … Read More..